When you feel tired exercising in one place, plan to move your exercise treadmill to another location. But the biggest question is how to move a Nordictrack treadmill when there are so many critical heavy parts. The simple solution is to fold your device and move it to the place of your choice.

You must be careful to move this expensive and attractive machine; otherwise, the device may be damaged, which is not desirable at all.

Here, our professional team will discuss in full how to disassemble Nordictrack treadmill for movement? Especially when you will go to separate the sensor and console from the machine smoothly without any hassle.  So let’s see how to take the treadmill to your new destination without any hassle.

How to Disassemble Nordictrack Treadmill For Moving?

However, there are many things to keep in mind when you want to move an expensive running machine from one place to another. Here we will discuss the issues worth mentioning among them, which you must know.

Disconnect the power source

The most important thing is when you transfer your running device to ensure that all plague is separate from the power source. Doing unplugging from the power source lets you safely move your device without any damage to parts. It’s one of the vital parts for moving your Nordictrack treadmill from place to place.

Tips: Make sure there is no mistake in remove plugging from the power source.

Detach the console

After disconnecting the cable from the power source, your next task is to remove the console cable from the console. Although finding a console cable is a bit challenging, but following my tips, you can easily find the line.

First, you will see two pieces of wire behind the handrail, then lightly pull the wire to disconnect the wire from the console. This way, you can easily disconnect your connection from the console.

Tips: When disconnecting the cable from the console, be careful not to pull too many pairs as this may cause the connection to lose its working capacity.

Locate and disconnect the grounding wire

Another essential task is grounding wire which is very thin and a little complicated to find. Typically, the thin grounding wire extends from the middle of the console to the back. Find the wire and disconnect it from the treadmill.

Tips: As the wire becomes thinner, people often forget to separate the wire from the running treadmill.

Detach console clamps

You can fold your favorite machine after disassembling all the wires that make the treadmill strong. Typically, console clamps are used to hold the screws and help hold the structure in place.

You will need to use a screw holder clamp to unscrew this structure from the console. To disassemble the console, you must make sure to use a 9 ”rod and Philips screwdriver.

Tips: You should not disassemble your machine without using a 9 “rod and Phillips screwdriver.

Detach the console from the treadmill

Now your main task is to carefully remove the console by leaving the six screws in place. These screws are usually located two on the right, two on the left, and two in the middle.

Unscrew the nuts easily using a Philip head screwdriver. Also, carefully remove the console and place it in a safe place. Keep in mind that it should not be held too tight as there are many sensitive sensors.

Tips: Since there are many sensitive sensors here, keep the console in a safe place very carefully.

Fold the treadmill

When you have successfully removed the console from the treadmill to a safe place, it means you are about 70% to 80% complete. Your next step is to disassemble the machine very easily for transportation or movement.

Now your main task is to remove the bolts that are kept upright in a safe place, usually eight bolts on a treadmill. You can use a Philips head screwdriver to open these bolts, which makes your job easier. Now carefully fold up your device to protect it from damage.

Tips: Take special care when folding up so that no parts are left behind.

Moving the treadmill

The next step is get to your destination safely once all the parts of your treadmill have been disassembled one by one. You must ensure that your device can reach your goal without any damage.

Now gently pull the handle of the treadmill to take your machine to its destination. You should keep in mind that your device has wheels so you can move it from one place to another without any problem.

Simultaneously, if you want to move your NordicTrack treadmill to any other place of choice by track, you need to make sure that you have enough space to carry your device.

Tips: Before transporting your gym machine to the truck, you need to make sure that the truck can transport all the treadmill’s isolated parts.

Unfolding the treadmill

Once you have reached your destination without any hassle, your next task is to unfold it. This step is also quite complicated, but, you can do your job very efficiently in some simple way.

Hold the handrails frame carefully and continue to gently push down on the moving desk. Now you will need an assistant, as the treadmill deck is quite heavy and you have to make sure that it does not get hurt. This way you can finish your work very quickly with care.

Tips: This task is very complicated, so be careful not to get hurt.

Summary of the How to Disassemble Nordictrack Treadmill For Moving

Our expert team tries to explain to you that Nordictrack treadmills are suitable for both commercial and home use in this article. So be careful from detachment to transport and know exactly How to Disassemble Nordictrack Treadmill For Moving. If you have any questions asked me to blow, I will try to answer my level best.

Tags: